Squires Metal Fabrications
Company’s skilled metalworkers
will undertake the fabrication of all
items from, Mild Steel, Aluminium, Bar,
Strip, Cold Rolled Section, Hollow Section,
Tube, Rolled Steel Section, Welded Mesh,
Expanded Metal, Durbar Flat, Flat or
Perforated Sheets, which are cut, mitred,
welded, bent, drilled and bolted in
fabrication, providing their size and
method of construction are within the
scope of the company’s activities.
Type of contracts include, industrial,
commercial, educational, domestic and
civil engineering work. Either to architect’s
details or on a design and build basis.
The Company is an authorised Orsogril
fabricator and can offer the full range
of products. A specialised catalogue
is available upon request.
Operates in accordance with BS EN ISO
9001 : 2000 in the design, manufacture
installation of metal fabrications.
Fabrications can be supplied to comply
with any recognised British Standards.
Practice or Building Regulation Standards
Design and installation services can
be provided. As fabrications are tailored
to the requirements of each individual
project it is helpful if drawings can
be sent with enquiries.
A full erection service is offered by
the company for the installation of
all fabrications on site.
The extremely varied range of sections
available allows complete design freedom,
resulting in infinite variations in
appearance to compliment the particular
situation for which the work is intended.
Work is finished to any specification
required. All loose scale and rust are
removed. Additional cleaning can be
obtained by shot-blasting. Welds can
either be ‘left as laid’
or ground smooth. Steelwork is normally
primed with one coat red oxide primer
at the works, but other finishes are
available, e.g. hot dip galvanising,
zinc rich epoxy primer, vyflex PVC,
nylon dip coating, stove enamelling,
polyester powder coating and synthapulvin.
PVC handrails are available in a range
Management System by
National Quality Assurance Limited